The Short Answer (Read These Three Lines)
- Consumables for one full A3 transfer (30×42 cm) cost USD 0.47–0.68. Film is the largest line at USD 0.25–0.32, then white ink at USD 0.10–0.16, powder at USD 0.07–0.12, colour ink at USD 0.03–0.05, and power at USD 0.02–0.03. A4 lands at USD 0.22–0.35; a left-chest logo at USD 0.04–0.07.
- Consumables are not the cost driver — the blank is. A finished custom T-shirt at USD 3.20–4.50 total is 70%–80% blank garment and 12%–18% consumables. Shops that quote on "ink cost" and forget the blank are the ones that lose money on volume.
- The margin number that matters is gross profit, not "net profit". At 50 shirts/day a shop clears roughly USD 800/day before rent, salaries, equipment depreciation and returns. Published "net profit" figures that skip those four lines are the fastest way to lose credibility with a buyer who has actually run a shop.
1. Consumable Cost per A3 Transfer, Itemised
Calculated on a 30×42 cm full-coverage design at roughly 70% colour coverage with a solid white backing, using standard commercial-grade materials:
| Consumable | Market price reference | Usage per A3 (0.126 m²) | Cost per A3 |
|---|---|---|---|
| PET transfer film | USD 60–80 / 60 cm × 100 m roll | 0.126 m² (two A3 across a 42 cm width) | USD 0.25–0.32 |
| DTF pigment ink (CMYK) | USD 22–30 / 1,000 ml | 1.2–1.8 ml at ~70% coverage | USD 0.03–0.05 |
| DTF white ink | USD 25–35 / 1,000 ml | 3.5–5.0 ml at 100% backing | USD 0.10–0.16 |
| Hot-melt TPU powder | USD 12–18 / 1 kg | 8–12 g | USD 0.07–0.12 |
| Electricity (printer + shaker oven) | USD 0.12 / kWh | 0.15–0.25 kWh equivalent | USD 0.02–0.03 |
| Total consumables | — | One full A3 graphic | USD 0.47–0.68 |
Two lines dominate. Film is 50%–55% of consumable cost, white ink plus powder is another 35%. That is why the two levers that actually move cost are film yield (layout efficiency) and white-ink discipline — not the price of colour ink, which almost nobody should be negotiating over.
2. Cost Is Set by Design Area, Not by Garment Size
The most common quoting error is charging per shirt instead of per design area. An A3 back print and a 10×10 cm left-chest logo go on the same T-shirt and differ by a factor of twelve in material cost:
| Design | Area | Consumable cost | Share of a USD 20 retail shirt |
|---|---|---|---|
| Full A3 back print | 0.126 m² | USD 0.47–0.68 | 2.4%–3.4% |
| A4 front print | 0.062 m² | USD 0.22–0.35 | 1.1%–1.8% |
| Left-chest logo | 0.010 m² | USD 0.04–0.07 | 0.2%–0.4% |
| Sleeve print | 0.015 m² | USD 0.06–0.09 | 0.3%–0.5% |
The practical consequence: a shop doing mainly left-chest logos has an almost irrelevant consumable line and should be pricing labour and setup instead. Conversely, a shop doing full-back prints needs to defend film yield aggressively, because that is where the money leaks.
3. Full Cost Stack for One Finished T-Shirt
| Cost line | Amount (USD) | Notes |
|---|---|---|
| Blank garment (premium 100% cotton) | 2.50–3.50 | The largest single line, and the least negotiable |
| DTF transfer, A3 | 0.47–0.68 | Film, ink, powder, power |
| Heat press labour | 0.30–0.50 | Press, peel, QC — 60–90 seconds of hands-on time |
| Packing and consumables | 0.10–0.25 | Bag, hangtag, size sticker |
| Direct cost | 3.37–4.93 | Before overhead |
| Retail / wholesale price | 18.00–28.00 | Custom apparel, small to mid batch |
| Gross margin | 78%–85% | Before rent, salaries, depreciation, returns |
4. Gross Profit by Daily Output
The table below assumes USD 20 average selling price, USD 3.75 direct cost per shirt (blank + transfer + press labour at the mid of each range), and 25 working days per month. It is gross profit — it does not yet subtract rent, salaried staff, equipment depreciation or returns.
| Daily output | Direct cost / day | Revenue / day | Gross profit / day | Gross profit / month (25 days) |
|---|---|---|---|---|
| 50 shirts — startup | USD 187.50 | USD 1,000 | USD 812.50 | USD 20,312 |
| 200 shirts — commercial | USD 750.00 | USD 4,000 | USD 3,250 | USD 81,250 |
| 500 shirts — factory | USD 1,875.00 | USD 10,000 | USD 8,125 | USD 203,125 |
Read this table as a ceiling, not a forecast. Real overhead for a 200-shirt/day operation — one 60 cm machine, one press station, 80–120 m² of floor, two to three staff — typically runs USD 6,000–12,000 per month. Subtract that and the honest number is roughly half to two-thirds of the gross figure. Any supplier publishing "net profit" without those lines is quoting arithmetic, not business.
Gross profit tells you whether the process works. Net profit tells you whether the business works. Publishing the first as the second is how suppliers lose the buyers who have actually run a shop.
5. Equipment Selection by Daily Volume
Match the machine to the order book, not to the spec sheet. Throughput below is print-stage only:
| Daily output | Configuration | Print-stage throughput | Typical payback |
|---|---|---|---|
| Under 150 transfers/day | FLY-4202DW — 42 cm all-in-one, 2 × I3200-A1 | 11–14 m²/h @ 4-pass | 4–8 months at 100–150 A3/day |
| 150–400 transfers/day | FLY-604DW + FLY-650-C4 — 60 cm, 4 × I3200-A1 | 15 m²/h | 3–6 months at 250–400 A3/day |
| 400–800 transfers/day | FLY-606DW + FLY-6506D — 60 cm, 6 × I3200-A1 | 25–30 m²/h | 2–5 months at 500–700 A3/day |
| Sampling only | FLY-402DW + FLY-400D — A3 desktop | 3–5 m²/h | Not a volume machine — it is a decision machine |
Three selection rules that survive contact with reality:
- Do not buy the wide machine for the dark-garment work. White-ink passes cut throughput 35%–50%. Size on the dark-garment number, because that is the number your shift actually delivers.
- The printer is rarely the bottleneck. Most DTF shops that miss deadlines are limited by powder shaking, peeling or pressing — not printing. Adding a printer to a press-limited shop makes the pile of film taller, not the revenue bigger.
- Throughput claims in the market are inflated roughly 2×. A 42 cm dual-head machine does not run at 20 m²/h — the head-count multiplier is 1.6–1.9× at best, as worked through in our I3200 vs I1600 printhead comparison. Compare on cost per finished transfer, not on the number on the brochure.
6. Three Cost Leaks That Eat the Margin
| Leak | Mechanism | Typical loss | Fix |
|---|---|---|---|
| White-ink sedimentation | Titanium dioxide settles in the line and sub-tank during idle periods | One clogged channel can cost a full head plus a lost shift | Continuous tank agitation plus peristaltic sub-tank circulation; moist capping every idle period |
| Film static and powder scatter | Untreated film builds static, attracting powder to unprinted areas | Visible halo defects on 3%–8% of pieces | Double-matte treated film; controlled humidity 45%–65%; clean shaker screens daily |
| Uncalibrated ICC profile | Default profile over-inks to compensate for colour shift | Up to 20% excess ink with no visible gain | Linearise per film batch; re-profile when ink lot changes |
Of these three, the ICC leak is the one that gets ignored because it is invisible. It does not produce defects — it just quietly raises ink consumption on every square metre, all year.
7. DTF vs DTG vs Screen Printing on Cost
| Process | Setup cost per design | Cost at 10 pcs | Cost at 500 pcs | Best fit |
|---|---|---|---|---|
| DTF Printer | None — no screen, no pre-treatment liquid | Lowest | Mid | 1–300 pcs, full colour, polyester and blends |
| DTG | Pre-treatment per garment | Higher | Higher | Cotton only, soft hand feel priority |
| Screen printing | Screen, film, press setup per colour | Highest | Lowest per unit | 1,000+ pcs, 1–2 spot colours |
The crossover is the only number worth memorising: below roughly 300 pieces per design, DTF wins on total cost; above 1,000 pieces of simple spot colour, screen printing wins on unit price. Between those two, it comes down to colour count and fabric.
8. Frequently Asked Questions
Is DTF cheaper than DTG printing?
Consumables run roughly 50%–70% lower than DTG, mainly because DTF needs no liquid pre-treatment per garment and uses less white ink for the same opacity. The gap widens further on polyester, nylon, canvas and leather, where DTG either struggles or cannot print at all. On 100% cotton with a soft-hand requirement, DTG can still be the better process — but it is the more expensive one.
Is DTF cheaper than screen printing for small batches?
Yes, decisively, below about 200–300 pieces per design. Screen printing carries a fixed setup per colour: screen burning, film output and press cleaning. DTF has essentially zero per-design setup — the first piece costs the same as the hundredth. Above 1,000 pieces of one or two spot colours, screen printing wins on unit price, but it cannot reproduce full-colour photographic artwork economically.
How many washes does a DTF transfer survive?
Twenty to thirty washes at 40 °C is a realistic field expectation for a well-produced transfer; fifty or more is achievable under controlled test conditions with correct powder coverage and full fusion. The variable that matters is not the ink but the press: under-fused powder fails at wash five, properly fused powder holds. Ask for the wash-test protocol, not the headline number.
Why does my cost per shirt not match these figures?
Check three things in order. First, design area — a full-back print costs twelve times a left-chest logo. Second, layout efficiency — if you are only filling 60% of the film width, your effective film cost is 40% higher than the table. Third, white-ink volume — dark garments with thick white backing use two to three times the ink of light garments. The table assumes a full A3 area at 85% layout efficiency on a light-to-mid garment.
Do I need a separate powder shaker and press, or can one machine do it all?
An all-in-one machine integrates printer, shaker and dryer, which saves floor space and handling. You still need a heat press — no DTF printer presses the transfer onto the garment. Budget for the press as a separate line item; it is often the bottleneck in a shop that has already bought a fast printer.
Which single change reduces cost the most?
Improving layout efficiency. Going from 60% to 85% film utilisation cuts effective film cost by about 30%, and film is already half of consumable cost. Nesting smaller designs across the film width, and batching same-colour orders into one run, costs nothing but a few minutes of prepress work per day.
Next Step
To quote a real number instead of a range, we need four facts: design area, blank cost, daily volume, and dark-garment share.
Send those four and we will return a cost sheet with consumables, realistic daily capacity, and the machine configuration that matches your order mix — plus a sample transfer so you can wash-test it before committing to a machine.
FULIYIN Printer manufactures DTF Printer, UV DTF Printer, Sublimation Printer and Eco-Solvent Printer lines, with factory-direct pricing and sample kits shipped worldwide. Contact us at fuliyin01@gmail.com or through fuliyin.com — and bring your actual cost numbers, because that is where the conversation should start.