Choose by format, print head and relief needs; full specs are on each product page.
60×90cm UV printer for direct printing on acrylic, glass, wood, metal & more. Emboss and varnish effects for signage, gifts & personalization. MOQ 1.
For compatible UV inkjet equipment — advertising signage, creative gifts and decorative pattern printing; ink models are matched to the print head, curing system and application material.
Material, format, throughput and relief requirements decide whether the machine really fits your orders.
Acrylic, glass, wood, metal, leather and other rigid flat parts are the flatbed's home ground. Check max thickness first: the FLY-6090U adjusts 0-180 mm; thicker or irregular parts need custom jigs.
60x90 cm is the sweet spot for sampling and small batches. For volume orders, use a jig to nest multiple parts per pass — unit cost drops sharply.
XP600 for entry level, TX800 for value, I1600 for speed plus precision, I3200 for high-volume production. White ink and varnish occupy channels, and relief mode slows output.
UV ink cures instantly, but glass and metal benefit from cleaning and a primer. Always run a physical sample to confirm colour, adhesion and abrasion resistance before mass production.
Different materials, different process settings.
Acrylic display pieces, medals, keychains, phone cases in small runs.
Metal plates, acrylic lightbox panels, direction signs, door plates.
Short-run graphics on cartons and gift boxes without plate costs.
Wood veneer panels, glass decorative prints, personalised custom orders.
Practical guides on selection, process and maintenance.
60x90 cm is the sweet spot for sampling and short runs on rigid materials. Print head options, material thickness, white-ink relief, pre-treatment and price bands — everything you need to specify a 6090 UV flatbed.
Read Full GuideRead these before you ask for a quote — it speeds everything up.
A UV flatbed prints directly onto the material surface and the part is ready to use — best for flat rigid parts such as acrylic, wood, glass and metal plates. UV DTF prints onto a film that is then transferred, which suits curved, irregular and flexible surfaces. Choose flatbed for rigid flats; choose UV DTF for irregular surfaces.
The table adjusts 0-180 mm, covering standard boards and finished parts. Parts beyond 180 mm need a custom jig or a transfer process.
Adhesion after UV curing depends on the material's surface energy. For glass and metal we recommend cleaning plus a primer. Before mass production, confirm colour, adhesion and abrasion resistance with a physical sample.
White ink is stacked repeatedly in the same area to build height, then colour and varnish are layered on top. Relief occupies the white channel and reduces speed, so it suits higher-value gifts and plates.
Price varies with print head configuration (XP600 / TX800 / I1600 / I3200) and whether a white-ink and varnish set is included. Send us your material, artwork size and daily output and we will return a configuration and quote within 48 hours.
Tell us the material, size and daily output — we return a sample result and a configured quote within 48 hours.